Condensing series
CE Approved Customizable Stainless Steel Tubuler Condenser
Products Description
As the cooling flow is bigand its speed is high, so the heat transfer coefficient is high, generally K= 600～700(kcal/m2h℃).
It takes small land area when installed vertically, and it can be installed outdoors.
The cooling water flows straight at a high speed. Therefore, the requirement for water quality is not very high, and common water can serve as the cooling water.
The water scale in the pipe can be easily removed, and it can be done without stopping the cooling system.
High clean liquid temperature control.Applicable process points: suitable for pharmaceutical injection water, purified water, water injection and other working conditions, such as: medicine heating, cooling; vaccine and blood products cooling and heating; injection water / purified water heating cooling, etc. Pasteurization, hot water sterilization, etc.
Application
Cooling / heating of injection water.
The injection water point cooling.
Cooling / heating of pharmaceutical products.
Clean steam condensing and cooling.
High clean liquid temperature control.Applicable process points: suitable for pharmaceutical injection water, purified water, water injection and other working conditions, such as: medicine heating, cooling; vaccine and blood products cooling and heating; injection water / purified water heating cooling, etc. Pasteurization, hot water sterilization, etc.
Technical Parameter
|
Model Number |
Heat Exchange Area (m³) |
Operating Pressure (MPA) |
Working Temperature （℃） |
Heat transfer coefficient （W/㎡K） |
|
ZLL1 |
0.4-1.2 |
0.6-1.0 |
≤120 |
≤350 |
|
ZLL2 |
1.3-3.5 |
0.6-1.0 |
≤120 |
≤350 |
|
... |
... |
... |
... |
... |
|
ZLL12 |
140-180 |
0.6-1.0 |
≤120 |
≤350 |