Safety operation and maintenance procedures of agitated nutsche filter dryer

The agitated nutsche filter dryer is widely used in various industrial places, which can accomplish the target task efficiently and quickly. However, in the process of use, it is necessary to pay attention to some safe operations and standardized maintenance procedures to prolong the service life of the equipment and ensure the safety of work.

Safe operation

Before using the agitated nutsche filter dryer, carefully check whether all components of the equipment are installed firmly, and whether there is looseness, wear and corrosion. In particular, the screws and fixing blocks of the fuselage base should be tested by hand to see if they are loose.

Before connecting the power supply, ensure that the power supply line is intact and conform to the relevant safety regulations. At the same time, pay attention to the positive and negative poles of the line when connecting the power supply to avoid short circuit damage to the equipment.

When operating the control panel of the agitated nutsche filter dryer, you should read the equipment description carefully, understand the function of each function button and operate as required. During use, especially when cleaning and maintaining the machine, be sure to turn off all relevant power switches to avoid personal injury.

Before starting the equipment, it must be ensured that there will be no people or objects in the equipment to block the operation. In the process of operation, we need to operate strictly according to the rated load of the equipment, and we must not overload it to avoid equipment failure and personal injury.

Before stopping the machine, the power switch of the agitated nutsche filter dryer should be turned off. The entry prohibition of back and hands should also be closed to ensure the safe operation of the equipment when it is stopped. After the operation is completed, the equipment should be cleaned and maintained to ensure its normal service life.

Routine order

In the process of use, the water level of the agitated nutsche filter dryer should be checked regularly to ensure the continuity of equipment construction. At the same time, the water level indicator on the operation panel should be checked to ensure the water level accuracy.

The agitated nutsche filter dryer is built with a mesh filter, and impurities are easy to block the filter and affect the function of the equipment. Therefore, we need to clean the mesh filter regularly to improve the filtration efficiency.

During the use of the agitated nutsche filter dryer, we also need to regularly clean the motor and accessories to remove dust and debris between the screens and in the motor. At the same time, when cleaning, be sure to turn off all power switches to prevent accidents.

For the pressure-bearing shell in the equipment, it is necessary to carry out regular inspection to ensure that its structure is complete and there is no crack or failure. In case of damage, it should be replaced immediately to avoid accidents.

The inside of the filter body, especially the inside of the water tank, needs to be kept dry to avoid scale and corrosion caused by long-term use. Therefore, after use, the interior of the fuselage should be cleaned in time and maintained.

The agitated nutsche filter dryer is a reliable and efficient equipment. Correct use and standardized maintenance procedures can not only prolong the service life of the equipment, but also ensure the working efficiency.

In the daily use process, we should pay attention to safe operation and regular maintenance, so as to use the agitated nutsche filter dryer stably and efficiently.