Vacuum Stainless Steel Single Conic Rotary Crystallizer for Chemical and Pharmaceutical

Due to the particularity of the material, the traditional structure cannot guarantee the sufficiency of the material and uniformity of temperature in the tank, and the crystal form is not good enough. 

In order to improve the internal structure of traditional crystallization tanks, an internal heating board has been added in the tank to cool material down to a predetermined temperature in a short time. 

Comparing with the traditional jacket temperature control method, refrigerant is designed to flow through both jacket and internal heating board to optimize temperature control. The internal and external control design can ensure uniform temperature and form efficiently.

Turn barrel to the horizontal position after feeding. At the same time, put refrigerant into jacket and internal heat conduction plate. Due to the direct contact between the heat plate and materials, heat exchange is uniform and fast, which not only improves the purity of materials, but also decrease the exchanging time and improve the productivity. 

After crystallization, switch on and rotate the equipment in 360°. Materials will be off from the barrel. Prepare for the next step to extract supernatant. The vacuum head is downward when you extract. After this step, adjust vacuum head upward. At the same time, switch on and rotate the equipment to make it vacuum and dry. When materials are dry enough, turn cone end downward, then completely discharge.

Material: SS304, SS316L, Ti, Hastelloy-C, PTFE lined or other materials